HP Photosmart M22 5 in 1 Universal Battery Charger with USB Interface & AA Emergency Charger

5 in 1 Universal Battery Charger with USB Interface & AA Emergency Charger. for you to charge your battery, including digital camera batteries, cell phone Li-ion batteries, AA batteries anywhere with a battery capacity below 2000 mAh.

This charger enables you to
1. Charge your digital device battery separately without your digital device.
2. With the USB output connecting port, you could charge your digital device battery using your digital charging cable (which does not come with the charger);
3. With the AA battery holder, you could charge your digital device battery with AA battery in emergency situation ;
4. The AA battery holder enables you to charge your rechargeable AA battery;
5. With AA battery and USB Cable, you could use the power in AA battery to charger your digital device battery without AC Power supply.

Specification:

Directly charge any Li-Ion Battery with a capacity no larger than 2000 mAh, the output voltage is 4.2V and the Max Output mAh is 300 mAh.

Charge Li-Ion Battery through USB cable, the output voltage is 5.2V and the Max Output mAh is 700 mAh.

Use the AA battery to charge Li-ion battery, the output voltage is 4.2V and the Max Output mAh is 200 mAh.

Charge the Li-Ion Battery via AA battery through USB cable, the output voltage is 5.2V and the Max Output mAh is 170mAh.

The charger is with built-in Intelligent Recognition Circuit that will automatically switch the "+" "-" output of the charger to fit "+" "-" of the battery to make sure you can reliably charge your battery.

User Manual

1. To charge the cell phone Li-ion battery, digital battery, first switch the ON-OFF button on the corner side to OFF, then adjust the two metal pins of the charger to connect the "+" and the "-" contacts on the Li-ion battery. A red light on the charger will be on to sign that you have the correct connection. Then turn the AC wall attaching plug to charge the battery. A colorful light will keep flashing till the battery is fully charged.

2. To use the USB as a power output for charging, first switch the ON-OFF button on the corner side to OFF, then use a USB charging cable to connect the USB port located on the side of the charger and your cell phone or digital port. Your cell phone or digital cameras will tell you the charging process. And a colorful light will keep flashing till the battery is fully charged. (owning to the difference of electric current of different cell phones, there may be different full-charge notice between the cell phone and the charger, refer to the full-charge notice on the cell phone, digital cameras).

3. To charge the rechargeable AA battery, first switch the ON-OFF button on the corner side to OFF, then open the AA holder door on the side of the charger, put the AA rechargeable battery in the holder with the "+" "-" direction. The rechargeable AA battery can be used after being charged for some time. * Please note that rechargeable AA battery of different capacities need different charging time. (full-charged time for 1800 to 2100 mAh rechargeable AA battery is around 10 hrs; full-charged time for 2200 to 2800 mAh rechargeable AA battery is around 14 hrs). The charger will auto stop charging when rechargeable AA battery is full charged. However, the recommend charging time is within 24 hrs for rechargeable AA battery.

4. To use the AA battery to charge Li-ion cell phone battery or digital battery, first open the AA holder door on the side of the charger, put the AA battery in the holder with the "+" "-" direction, then switch the ON-OFF button on the corner side to ON, and adjust the two metal pins of the charger to connect the "+" and the "-" contacts on the Li-ion battery. A colorful light will keep flashing till the battery is fully charged or the AA battery is out of power.

5. To use the AA battery to charge devices with a USB output, first open the AA holder door on the side of the charger, put the AA battery in the holder with the "+" "-" direction, then switch the ON-OFF button on the corner side to ON, and connect the USB charging cable, one end of the USB charging cable to the USB port located on the side of the charger and the other end to your cell phone or digital camera. A colorful light will keep flashing till the battery is fully charged or the AA battery is out of power.

*The charger can be used between 110v ~ 220v.